“Mitigating void growth in out-of-autoclave prepreg processing using a semi-permeable membrane to maintain resin pressure" D Zebrine, M Anders and S Nutt, Adv Mfg: Polymers & Compos Sci (2022) DOI or USC Composites
“Droplet spreading on unidirectional fiber beds” P Martinez, B Jin, and S Nutt, J Compos Science (2021) DOI or USC Composites
“Fast cure of stable semi-pregs via VBO cure" D Bender, T Centea and S Nutt, Adv Mfg: Polymers & Compos Sci (2021) DOI or USC Composites
“Process robustness and defect formation mechanisms in unidirectional semipreg" W Edwards, P Martinez and S Nutt, Adv Mfg: Polymers & Compos Sci (2020) DOI or USC Composites
“Effective cure cycle development via flow optimization and advanced cure environments" D Kim and S Nutt, Adv Mfg: Polymers & Compos Sci (2020) DOI or USC Composites
“Air evacuation and resin impregnation in semi-pregs: effects of feature dimensions” S Schechter, LK Grunenfelder, and S Nutt, Adv Mfg: Polymers & Compos Sci (2020) DOI or USC Composites
“Design and application of discontinuous resin distribution patterns in vacuum-bag-only prepregs” S Schechter, LK Grunenfelder, and S Nutt, Adv Mfg: Polymers & Compos Sci (2020) DOI or USC composites
“Effects of debulk temperature on air evacuation during vacuum bag-only prepreg processing” W Hu and S Nutt, Adv Mfg: Polymers & Compos Sci (2020) DOI or USC Composites
“Mechanisms of Inter-ply Void Formation during Vacuum Bag-only Cure of Woven Prepregs” W Hu, T Centea, and S Nutt, Polymer Compos (2019) DOI or USC Composites
“Effects of Resin Distribution Patterns on Through-Thickness Air Removal in Vacuum-Bag-Only Prepregs” S Schechter, T Centea, and S Nutt, Compos A (2019) DOI or USC Composites
“Effects of material and process parameters of void evolution in unidirectional prepreg during vacuum-bag-only cure” W Hu, T Centea, and S Nutt, J Compos Materials (2019) DOI or USC Composites
“Method for in situ analysis of volatiles generated during cure” J Lo and S Nutt, Compos A (2019) DOI or USC Composites
“Polymer film dewetting for fabrication of out-of-autoclave prepreg with high through-thickness permeability” S Schechter, T Centea, and S Nutt Compos A (2018) DOI or USC Composites
“In-situ monitoring of void evolution in unidirectional prepreg” W Hu, LK Grunenfelder, T Centea, and S Nutt, J Compos Materials (2018) DOI or USC Composites
“Effects of thermal gradients on defect formation during the consolidation of partially-impregnated prepregs”, T Centea, G Peters, K Hendrie, and S Nutt, J Compos Materials (2017) DOI or USC Composites
“Process development for phenylehynyl-terminated PMDA-type asymmetric polyimide composites”, Y Zhang, A Jain, LK Grunenfelder, M Miyauchi, and S Nutt, High Performance Polymers (2017) DOI or USC Composites
“Processability of DDS isomers cured epoxy resin: effects of amine/epoxy ratio, humidity, and out-time”, D Kim, S Nutt, Polymer Enrgrg Sci (2017) DOI or USC Composites
“Modelling and monitoring of out-time and moisture absorption effects on cure kinetics and viscosity for an out-of-autoclave(OoA) prepreg” D Kim, T Centea, and S Nutt, Compos Sci & Tech (2017) DOI or USC Composites
“Effect of prepreg format on defect control in out-of-autoclave processing” L Grunenfelder, A Dills, T Centea, and S Nutt, Compos A, (2017) DOI or USC Composites
“Manufacturing Cost Relationships for Vacuum Bag-Only Prepreg Processing” T Centea and S Nutt, J Compos Matls (2016) DOI or USC Composites
“Defect reduction strategies for the manufacture of contoured laminates using vacuum bag-only prepregs” Y Ma, T Centea, and S Nutt, Polymer Compos (2015) DOI or USC Composites
“Surface Porosity during Vacuum Bag Only Prepreg Processing: Causes and Mitigation Strategies” L Hamill, T Centea, and S Nutt, Compos A (2015) DOI or USC Composites
“A Review of Out-of-Autoclave Prepregs – Material Properties, Process Phenomena, and Manufacturing Considerations” T Centea, L Grunenfelder, and S Nutt, Compos A (2015) DOI or USC Composites
“In-situ cure monitoring of an out-of-autoclave prepreg: Effects of out-time on viscosity, gelation and vitrification" D Kim, T Centea, S Nutt, Compos Sci &Tech (2014) DOI or USC Composites
“Out-Time Effects on Cure Kinetics and Viscosity for an Out of Autoclave (OOA) Prepreg: Modeling and Monitoring” D Kim, T Centea, S Nutt, Compos Sci & Tech (2014) DOI or USC Composites
“Effect of room-temperature out-time on tow impregnation in an out-of-autoclave prepreg,” L Grunenfelder, T Centea, P Hubert, and S Nutt, Compos A (2012) DOI or USC Composites
“Prepreg age monitoring via differential scanning calorimetry” L Grunenfelder and S Nutt, J Reinforced Plastics & Composites (2012) DOI or USC Composites
“Experimental validation of co-cure process of honeycomb sandwich structures simulation: adhesive fillet shape and bond-line porosity” D Zebrine, N Kermani, P Simachek, T Cender, S Advani, S Nutt, Adv Mfg: Polymers & Compos Sci (2022) DOI or USC Composites
“Surface porosity development in tool-side facesheets of honeycomb core sandwich structures during co-cure” D Zebrine, E Wadhwani, and S Nutt, Adv Mfg: Polymers & Compos Sci (2022) DOI or USC Composites
“Path-dependent bond-line evolution in equilibrated core honeycomb sandwich structures” D Zebrine, M Anders, T Centea and S Nutt, Adv Mfg: Polymers & Compos Sci (2020) DOI or USC Composites
“Permeability of co-cured honeycomb sandwich skins: effect of gas transport during processing” T Palit, T Centea, M Anders, D Zebrine and S Nutt, Adv Mfg: Polymers & Compos Sci (2020) DOI or USC Composites
“Design of composite lattice materials combined with fabrication approaches” J Xu, Y Wu, X Gao, H Wu, S Nutt, and S Yin, J Compos Materials (2019) DOI or USC Composites
Process diagnostics for co-cure of sandwich structures using in situ visualization” M Anders, D Zebrine, T Centea, and S Nutt, Compos A (2018) DOI or USC Composites
“In Situ Observations and Pressure Measurement for Autoclave Co-Cure of Honeycomb Core Sandwich Structures”, M Anders, D Zebrine, T Centea, and S Nutt, J Mfg Sci & Engrg (2017) DOI or USC Composites
“Honeytubes: Hollow lattice truss reinforced honeycombs for crushing protection”J Xu, B Liu, Y Huan, S Nutt, J Li, and S Yin, Compos Structures (2017) DOI or USC Composites
“Compressive efficiency of stretch-stretch hybrid hierarchical composite lattice cores” Y Sha and S Nutt, Materials & Design (2014) DOI or USC Composites
“Inertial stabilization of flexible polymer micro-lattice materials” S Yin, A Jacobsen, L Wu, and S Nutt, J Mater Sci, (2013) DOI or USC Composites
“Damping and low-velocity impact behavior of filled composite pyramidal lattice structures” Y Sha and S Nutt, J Compos Mater (2013) DOI or USC Composites
“In-plane compression of hollow composite pyramidal sandwich columns” S. Yin, S. Nutt, J Compos Mater (2013) DOI or USC Composites
“Stretch-bend-dominated hierarchical composite pyramidal lattice cores” Y Sha, L Wu, and SR Nutt, Compos Structures (2012) DOI or USC Composites
“Hybrid truss concepts for carbon fiber composite lattice structures” S Yin, L Wu, L Ma, and S Nutt, Compos Part B (2012) DOI or USC Composites
“Composite recycling with Biocatalytic thermoset reforming” C Olivar, Z Yu, B Iller, M Tangalos, C Jenkinson, S Nutt, B Oakley, C Wang, and T Williams, J American Chemical Society, July (2024) DOI or USC Composites
“A rapid electrochemical method to recycle carbon fiber composites using methyl radicals” Z Yu, J Lim, T Williams, and S Nutt, Green Chemistry, July (2023) DOI or USC Composites
“Catalytic aerobic depolymerization of epoxy thermoset composites” CA Naarro, Y Ma, K Michael, S Nutt, and TJ Williams, Green Chemistry, August (2021) DOI or USC Composites
“A Structural Chemistry Look at Composites Recycling” CA Naarro, CR Giffin, B Zhang, Z Yu, S Nutt and TJ Williams, Matls Horizons (2020) DOI or USC Composites
“Recovery and reuse of acid-digested amine/epoxy composite matrices” Y Ma and S Nutt, Polymer Degradation & Stability (2020) DOI or USC Composites
“A Recyclable Epoxy and its Composites for Wind Turbine Blade Applications” MS Wu, B Jin, and S Nutt, Adv Mfg: Polymers & Compos Sci (2019) DOI or USC Composites
“Chemical treatment for recycling of amine/epoxy Compos At atmospheric pressure” Y Ma and S Nutt Polymer Degrad & Stability (2018) DOI or USC Composites
Mechanism and catalysis of oxidative degradation of fiber-reinforced epoxy composites” CA Navarro, EA Kedzie, Y Ma, KH Michael, SR Nutt, and TJ Williams, Topics in Catalysis (2018) DOI or USC Composites
“Reuse and Upcycling of Thermoset Prepreg Scrap: Case Study with Out-Of-Autoclave Carbon Fiber/Epoxy Prepreg” Gaurav Nilakantan, S Nutt, J Compos Materials (2017) DOI or USC Composites
“Chemical Treatment for Dissolution of Amine-Cured Epoxies at Atmospheric Pressure”, Y Ma, D Kim, and S Nutt, Polym Degrad Stab (2017) DOI or USC Composites
“Reuse and Upcycling of Aerospace Prepreg Scrap and Waste” Gaurav Nilakantan and S Nutt, Reinforced Plastics (2015) DOI or USC Composites
“Flax-Reinforced vitrimer epoxy composites produced via RTM" P Martinez and S Nutt, J Compos Sci (2024) DOI or USC Composites
“Thickness variation in contoured composite parts by vacuum infusion" P Martinez, B Jin and S Nutt, Adv Mfg: Polymers & Compos Sci (2023) DOI or USC Composites
“Effects of post-infusion dwell on vacuum infusion of thermoset composites toughened by thermoplastic interlaminar veils " J Shin, M Anders, D Kim, B Jin and S Nutt, J Compos Matls (2021) DOI or USC Composites
“In Situ Resin Age Assessment Using Dielectric Analysis and Resin Cure Map for Efficient Vacuum Infusion " J Shin and S Nutt, Adv Mfg: Polymers & Compos Sci (2020) DOI or USC Composites
“The Effect of Processing Parameters on Volatile Release for a Benzoxazine/Epoxy Blended RTM Resin; J Lo, M Anders, T Centea, and S Nutt, Compos A (2016) DOI or USC Composites
“Development of a Process Window for Minimizing Volatile-Induced Surface Porosity in the Resin Transfer Molding of a Benzoxazine/Epoxy Blend” M Anders, J Lo, T Centea, and S Nutt, J Advanced Matls (2016) USC Composites
“Eliminating Volatile-Induced Surface Porosity During Resin Transfer Molding of a Benzoxazine/Epoxy Blend” M Anders, J Lo, T Centea, and S Nutt, Compos Part A (2016) DOI or USC Composites
“Automated planning for robotic layup of composite prepreg ” R Malhan, A Shembekar, A Kabir, P Bhatt, B Shah, S Zanio, S Nutt and S Gupta, Robotics & Computer-Integrated Manufacturing (2021) DOI or USC Composites
“Thermoplastic Prepreg with Partially Polymerized Matrix: Material and Process Development for Efficient Part Manufacturing” JH Shin, D Kim, T Centea, and S Nutt, Compos A (2019) DOI or USC Composites
“Thermo-oxidative aging and thermal cycling of PETI-340M composites” X Li, B Jin, T Tsotsis and S Nutt, High Performance Polymers (2021) DOI or USC Composites
“Effects of thermal cycling on phenylethynyl-terminated PMDA-type asymmetric polyimide composites” Y Zhang, M Miyauchi, and S Nutt, High Performance Polymers (2018) DOI or USC Composites
“Moisture absorption and hydrothermal aging in phenylethynyl-terminated PMDA-type polyimide and composites” Y Zhang, M Miyauchi, and S Nutt, High Performance Polymers (2018) DOI or USC Composites
“Thermal oxidation of PEPA terminated Kapton backbone polyimide” X Li, M Miyauchi, C Gonzalez, S Nutt, High Performance Polymers (2018) DOI or USC Composites
“Modelling and monitoring of out-time and moisture absorption effects on cure kinetics and viscosity for an out-of-autoclave(OoA) prepreg” D Kim, T Centea, and S Nutt, Compos Sci & Tech (2017) DOI or USC Composites
“Thermal Oxidation aging of polydicyclopentadiene and composites” Y. Hu, Y. Zhang,and S.R. Nutt, Polymer Composites, (2016) DOI or USC Composites
“Water Immersion aging of Polydicyclopentadiene Resin and Glass Fiber Composites” Y Hu, X Li, A Lang, Y Zhang, and S Nutt, Polymer Degradation and Stability (2015) DOI or USC Composites
“Hygrothermal aging effects on fatigue of glass fiber/polydicyclopentadiene composites” Y. Hu, A.W. Lang, X. Li, and S.R. Nutt, Polymer Degradation and Stability (2014) DOI or USC Composites
“In-situ cure monitoring of an out-of-autoclave prepreg: Effects of out-time on viscosity, gelation and vitrification" D Kim, T Centea, S Nutt, Compos Sci &Tech (2014) DOI or USC Composites
“Out-Time Effects on Cure Kinetics and Viscosity for an Out of Autoclave (OOA) Prepreg: Modeling and Monitoring” D Kim, T Centea, S Nutt, Compos Sci & Tech (2014) DOI or USC Composites
“Effect of room-temperature out-time on tow impregnation in an out-of-autoclave prepreg,” L Grunenfelder, T Centea, P Hubert, and S Nutt, Compos A (2012) DOI or USC Composites
“Prepreg age monitoring via differential scanning calorimetry” L Grunenfelder and S Nutt, J Reinforced Plastics & Composites (2012) DOI or USC Composites
“Moisture Absorption in Unidirectional Hybrid Composites” E Barjasteh and S Nutt, Compos A (2012) DOI or USC Composites
“Radiation Effects on Composites for Long-Duration Lunar Habitats” K. Rojdev, M.J.E. O’Rourke, C. Hill. S. Nutt, and W. Atwell, J Compos Mater (2012) DOI or USC Composites
“In situ strain analysis of potential habitat composites exposed to a simulated long-term lunar radiation exposure” K Rojdev, M O’Rourke, C Hill, S Nutt, and W Atwell, J Rad Phys & Chem (2012) DOI or USC Composites
“Dimensional Effects of Hybrid Bond Layers on CFRP Metallized by Ti Cold Spray” P Feng, K Kim, A Blassino, I Nault, S Lee, S Nutt, J Thermal Spray Tech (2023) DOI or USC Composites
“Effects of interface microstructure on adhesion of polyetheretherketone metallized by titanium cold spray” P Feng, A Takase, S Nutt, Mater Lett (2023) DOI or USC Composites
“Hybrid Bond Layers for Cold Spray Metallization of CFRP Surfaces” P Feng, Y Cho, K Kim, A Blassino, I Nault, S Lee, S Nutt, J Thermal Spray Tech (2023) DOI or USC Composites
“Depositing Aluminum onto PEKK Composites by Cold Spray” P Feng, R Rokni, and S Nutt, J Thermal Spray Tech (2021) DOI or USC Composites
“Depositing Al-based metallic coatings onto polymer substrates by cold spray” R Rokni, P Feng, C Widener, and S Nutt, J Thermal Spray Tech (2019) DOI or USC Composites
“Effects of preprocessing on multi-direction properties of 5056 Al cold-spray deposits” R Rokni, A Nardi, V Champagne, S Nutt, J Thermal Spray Tech (2018) DOI or USC Composites
“Review of Relationship Between Particle Deformation-Coating Microstructure and Properties in High Pressure Cold Spray”, M Rokni, S Nutt, C Widener, V Champagne, R Hrabe, Journal of Thermal Spray Technology (2017) DOI or USC Composites
“The Effects of Heat Treatment on 7075 Al Cold Spray Deposits”, M Rokni, C Widener, V Champagne, G Grawford, and S Nutt, Surface and Coatings Technology (2017) DOI or USC Composites
“Ductile phase toughening in TiBw/Ti-Ti3Al metallic-intermetallic laminates” H Wu, B Jin, L Geng, G Fan, X Cui, M Huang, R Hicks, and S Nutt, Metall Trans A (2015) DOI or USC Composites
“Two-Step SPD Processing of a Trimodal Al-Based Nanocomposite”Y Zhang, S Sabbaghianrad, H Yang, T Topping, T Langdon, E Lavernia, J Schoenung, and S Nutt, Metall Trans (2015) DOI or USC Composites
“Dynamic Micro-strain Analaysis of Ultrafine-Grained Aluminum Magnesium alloy using Digital Image Correlation”, Y Zhang, T Topping, E Lavernia, and S Nutt, Met Trans A (2013) DOI or USC Composites
“Compression and low-velocity impact behavior of aluminum syntactic foam” G Castro and S Nutt, Mat Sci & Engrg (2013) DOI or USC Composites
“Effects of extrusion deformation on microstructure, mechanical properties and hot workability of b containing TiAl alloy” W Xu, D Shan, H Zhang, X Li, Y Zhang, and S Nutt, Mater Sci & Engrg (2013) DOI or USC Composites
“Synthesis of syntactic steel foam using gravity-fed infiltration” G Castro and S Nutt, Mater Sci & Engrg (2012) DOI or USC Composites
“Influence of Hot Isostatic Pressing on the Microstructure and Mechanical Behavior of a Nanostructured Al Alloy” T Topping, B Ahn, S Nutt, and E Lavernia, Powder Metall (2012) DOI or USC Composites
“Synthesis of syntactic steel foam using mechanical pressure infiltration” G Castro and S Nutt, Mater Sci & Engrg (2012) DOI or USC Composites
“Five-Axis Additive Manufacturing of a Thermoset Composite Formulation for Thermal Protection Systems” A Kennedy, Z McNulty and S Nutt, SAMPE Journal (July/Aug 2024) DOI or USC Composites
“Producing ablative thermal protection systems by additive manufacturing” A Kennedy, Z McNulty and S Nutt, Adv Mfg: Polymers & Compos Sci (2024) DOI or USC Composites
“Thermal oxidation of PEPA terminated Kapton backbone polyimide” X Li, M Miyauchi, C Gonzalez, S Nutt, High Performance Polymers (2018) DOI or USC Composites
“Moisture absorption and hydrothermal aging in phenylethynyl-terminated PMDA-type polyimide and composites” Y Zhang, M Miyauchi, and S Nutt, High Performance Polymers (2018) DOI or USC Composites
“Structure and properties of a phenylethynyl-terminated PMDA-type asymmetric polyimide” Y Zhang, M Miyauchi, and S Nutt, High Performance Polymers (2018) DOI or USC Composites
“Effects of thermal cycling on phenylethynyl-terminated PMDA-type asymmetric polyimide composites” Y Zhang, M Miyauchi, and S Nutt, High Performance Polymers (2018) DOI or USC Composites
“Structure and properties of a phenylethynyl-terminated PMDA-type asymmetric polyimide” Y Zhang, M Miyauchi, and S Nutt, High Performance Polymers (2018) DOI or USC Composites
“Process development for phenylehynyl-terminated PMDA-type asymmetric polyimide composites”, Y Zhang, A Jain, LK Grunenfelder, M Miyauchi, and S Nutt, High Performance Polymers (2017) DOI or USC Composites
“Compressive properties of hollow lattice truss reinforced honeycombs (honeytubes) by additive manufacturing: patterning and tube alignment effects” J Xu, Y Wu, L Wang, J Li, Y Yang, Y Tian, Z Gong, P Zhang, S Nutt, and S Yin, Matls & Design (2018) DOI or USC Composites
“Effects of Ply Orientation and Material on the Ballistic Impact Behavior of Multi-layer Plain-Weave Aramid Fabric Targets” G Nilakantan and S Nutt, Defence Technology(2017) DOI or USC Composites
“Damage Evaluation in Tube Spinnability Test with Ductile Fracture Criteria” H Ma, W Xu, B Jin, D Shan, and S Nutt, Intl J Mech Sci (2015) DOI or USC Composites
“Hypervelocity Impact Testing of a Metallic Glass-Stuffed Whipple Shield” D Hofmann, L Hamill, E Christianson, and S Nutt, Adv Engrg Matls (2015) DOI or USC Composites
“Parametric Modeling, Higher Order FEA and Experimental Investigation of Hat-Stiffened Composite Panels” X Li, R Hicks, A Pun, S Joshi, and S Nutt, Compos Structures (2015) DOI or USC Composites
“Transverse compression failuire of unidirectional composites” Y Hu, N Kar, and S Nutt, Polymer Compos (2014) DOI or USC Composites
“Effects of Fabric Target Shape and Size on the V50 Ballistic Impact Response of Soft Body Armor Composite Structures” G Nilakantan and S Nutt, Compos Structures (2014) DOI or USC Composites
“Effects of Fabric Target Shape and Size on the V50 Ballistic Impact Response of Soft Body Armor Composite Structures” G Nilakantan and S Nutt, Compos Structures (2014) DOI or USC Composites
“Compression and low-velocity impact behavior of aluminum syntactic foam” G Castro and S Nutt, Mat Sci & Engrg (2013) DOI or USC Composites
“Tension-tension fatigue behavior of layer-to-layer 3-D angle-interlock woven composites” L Jin, B Jin, S Nutt, B Sun, and B Gu, Mater Chem & Phys (2013) DOI or USC Composites
“Influence of Hot Isostatic Pressing on the Microstructure and Mechanical Behavior of a Nanostructured Al Alloy” T Topping, B Ahn, S Nutt, and E Lavernia, Powder Metall (2012) DOI or USC Composites
“Diametral compression of pultruded composite rods” N Kar, Y Hu, B Ahn, and S Nutt, Composites Sci & Tech (2012) DOI or USC Composites
“Tension-tension fatigue of hybrid composite rods” N Kar, Y Hu, E Barjasteh, and S Nutt, Composites A (2012) DOI or USC Composites
“Micro-strain Evolution and Toughening Mechanisms in a Trimodal Al-based Metal Matrix Composite” Y Zhang, T Topping, H Yang, E Lavernia, J Schoenung, and S Nutt, Metall Trans A (2015) DOI or USC Composites
“Preparation and utility of self-lubricating & anti-wear graphene oxide/nano-polytetrafluoroethylene hybrid” T Huang, T Li, Y Xin, B Jin, Z Chen, C Su, H Chen, and S Nutt, RSC Advances(2014) DOI or USC Composites
“High-yield synthesis of single-layer graphene microsheets with dimensional control” Z Chen, T Huang, B Jin, J Hu, H Lu, and S Nutt, Carbon (2013) DOI or USC Composites
“Modified Graphene/Polymiide Nanocomopsites: Reinforcing and Tribologicial Effects” Huang, Ting; Y Xin, T Li, S Nutt, C Su,H Chen, P Liu, Z Lai, ACS Applied Mater. & Interfaces (2013) DOI or USC Composites
“InGaN/GaN Multiple Quantum Wells Grown on Nonpolar Facets of Vertical GaN Nanorod Arrays” T Yeh, Y Lin, L Stewart, D Dapkus, R Sarkissian, J O'Brien, B Ahn, and S Nutt, Nano Letters (2012) DOI or USC Composites
“Influence of Hot Isostatic Pressing on the Microstructure and Mechanical Behavior of a Nanostructured Al Alloy” T Topping, B Ahn, S Nutt, and E Lavernia, Powder Metall (2012) DOI or USC Composites
“Vertical Nonpolar Growth Templates for Light Emitting Diodes Formed with GaN Nanosheets” T Yeh, Y Lin, B Ahn, L Stewart, D Dapkus, and S Nutt, Appl Phys Lett (2012) DOI or USC Composites
“Effect of repair parameters on tensile failure mechanisms of wind turbine blade scarf repairs " C Ghafafian, I Moreno and S Nutt, Compos Part B (2024) DOI or USC Composites
“Resistance welding of carbon fiber reinforced vitrimer composites " P Martinez and S Nutt, J of Compos Sci (2024) DOI or USC Composites
“Efficient cocured scarf repair of composite structures through rheology modeling " D Bender and S Nutt, Adv Mfg: Polymers & Compos Sci (2021) DOI or USC Composites
“In-situ analysis of cocured scarf patch repairs" D Bender, T Centea, and S Nutt, Adv Mfg: Polymers & Compos Sci (2022) DOI or USC Composites
“Nucleation and Growth Characteristics of Cavities During the Early Stages of Tensile Creep Deformation in a Superplastic Zirconia-20 wt% Alumina Composite” D.M. Owen, A.H. Chokshi, and S.R. Nutt, J. Am. Ceram. Soc. 80 [9] (1997) 2433-36 DOI or USC Composites
“Fiber Coatings for SiC Fiber-Reinforced BMAS Glass-Ceramic Composites” E.Y. Sun, S.R. Nutt, and J.J. Brennan, J. Am. Ceram. Soc. 80[1] 264-7 (1997) DOI or USC Composites
“High-Temperature Tensile Behavior of a Boron Nitride-Coated Silicon Carbide-Fiber Glass-Ceramic Composite” E.Y. Sun, S.R. Nutt, and J.J. Brennan, J. Am. Ceram. Soc. 79 [6] (1996) 1521-29 DOI or USC Composites
“Oxidation of BN-Coated SiC Fibers in Ceramic Matrix Composites” B.W. Sheldon, E.Y. Sun, S.R. Nutt and J.J. Brennan, J. Am. Ceram. Soc. 79 [2] (1996) 539-43 DOI or USC Composites
“Flexural Creep of Coated SiC-Fiber-Reinforced Glass-Ceramic Composites" E.Y. Sun, S.R. Nutt, and J.J. Brennan, J. Am. Ceram. Soc. 78 [5] (1995) 1233-39 DOI or USC Composites
“Interfacial Microstructure and Chemistry of SiC/BN Dual Coated Nicalon Fiber Reinforced Glass-Ceramic Matrix Composites" E.Y. Sun, S.R. Nutt, and J .J. Brennan, J. Am. Ceram. Soc. 77 [5] (1994) 1329-39 DOI or USC Composites
“Evolution of Interface Microstructure in a Dual-Coated Silicon Carbide Fiber-Reinforced BMAS Glass-Ceramic Composite," E.Y. Sun, S.R. Nutt, and J.J. Brennan, in Ceramic Transactions 38, Advances in Ceramic-Matrix Composites, ed. N. Bansal, Am. Ceram. Soc., (1993) 199-210 USC Composites
“Creep Deformation of Whisker-Reinforced Alumina," S.R. Nutt and P. Lipetzky, Materials Science & Engineering A166 (1993) 199-209 DOI or USC Composites
“Creep Behavior of a SiC-Reinforced XD™ MoSi2 Composite," M. Suzuki and S.R. Nutt, Materials Science & Engineering A162 (1993) 73-82 DOI or USC Composites
“SiC Whisker-Reinforced Glass-Ceramic Composites: Interfaces and Properties," J.J. Brennan and S.R. Nutt, J. Am. Ceram. Soc. 75 [5] (1992) 1205-1216 DOI or USC Composites
“Creep Deformation of Alumina-SiC,'' S.R. Nutt, P. Lipetzky and P.F. Becher, Mat. Sci. & Engr, A126 (1990) 165-172 DOI or USC Composites
“Fracture Toughness and Fatigue Crack Growth Behavior of an A12O3-SiC Composite'' A.A. Morrone, S.R. Nutt, and S.Suresh, J. Mater. Sci. 23(1988) 3206-3213 DOI or USC Composites
“Transmission Loss and Dynamic Response of Hierarchical Acoustic Metamaterials” WT Edwards and S Nutt, J Vibration & Acoustics (2019) DOI or USC Composites
“Analytical model for low-frequency transmission loss calculation of plates with arbitrary mass loading” W Edwards, CM Chang, G McKnight, and SR Nutt J Vibration & Acoustics (2019) DOI or USC Composites
“Low-frequency eddy current testing of insulators and composites” L Hamill, J Emerson, K McGushion, and S Nutt, J Nondestructive Eval (2018) DOI or USC Composites
“Investigating bulk metallic glasses as ball-and-cone locators for spacecraft deployable structures” Z Dawson, L Hamill, P Bordeenithikasem, S Bradford, S Nutt, B McEnerney, R Dillon, and D Hofmann, Aerospace Sci & Tech (2018) DOI or USC Composites
“A peptide-based bioinspired approach to re-growing multilayered aprismatic enamel” K Mukherjee, Q Ruan, S Nutt, J Tao, J DeYoro, and J Moradian-Oldak, ACS Omega (2018) DOI or USC Composites
“Perfluoroalkyl end-functionalized polystyrene show lower glass transition temperatures: DSC and optical transmission studies” M Yurdacan, X Li, S Nutt, and T Hogen-Esch, Polymer (2018) DOI or USC Composites
“Scaling of membrane-type locally resonant acoustic metamaterial arrays” C Naify, C Chang, G McKnight, and S Nutt, J Acousitic Soc America (2012) DOI or USC Composites
“Adhesion of metallic glass and epoxy in composite-metal bonding”, L Hamill, and S Nutt, Composites B (2018) DOI or USC Composites
“Galvanic corrosion resistant fiber metallaminates of metallic glass and carbon fiber composites”, L Hamill, D Hofmann, and S Nutt, Adv Engrg Matls (2017) DOI or USC Composites
“Mean Field Homogenization Methods for Strand Composites”, A Jain, B Jin and S Nutt, Composites B (2017) DOI or USC Composites
“Assembly of layered monetite-chitosan nanocomposite and its transition to organized hydroxyapatite: An alternative to bone substitute material” J Moradian-Oldak, Q Ruan, D Liberman, Y Zhang, D Ren, Y Zhang, and S Nutt, ACS Biomaterials Sci & Engrg (2016) DOI or USC Composites
“Amelogenin affects brushite crystal morphology and promotes its phase transformation to monetite” D Ren, Q Ruan, J Tao, J Lo, S Nutt, J Moradian-Oldak, Crystal Growth & Design (2016) DOI or USC Composites
“All-printed Strain Sensors:Builidng Blocks of the Aircraft Structural Health Monitoring System” Y Zhang, N Anderson, S Bland, S Nutt, G Jursich, and Shiv Hoshi, Sensors and Actuators A (2016) DOI or USC Composites
“Thermosetting Polymer Based Flexible Synthetic Cement for Successful Zonal Isolation in Thermal Wells-A New Approach” R Shanbhag, Z Melrose, S Nutt, M Cleveland, and R Keese, Soc Petrol Engrs (2015) DOI or USC Composites
“Two-Step SPD Processing of a Trimodal Al-Based Nanocomposite”Y Zhang, S Sabbaghianrad, H Yang, T Topping, T Langdon, E Lavernia, J Schoenung, and S Nutt, Metall Trans (2015) DOI or USC Composites
“Amelogenin-Chitosan Matrix for Human Enamel Regrowth: Effects of viscosity and Supersaturation Degree” Q Ruan, N Siddiqah, X Li, S Nutt, and J Oldak, Connective Tissue Research (2014) DOI or USC Composites
“Bio-Inspired Impact Resistant Composites” L. Grunenfelder, N Suksangpanya, C Slinas, G Milliron, N Yaraghi, S Herrera, I Evans-Lutterodt, S Nutt, P Zavattieri, D Kisailus, Acta Biomaterialia (2014) DOI or USC Composites
“Effects of Fabric Target Shape and Size on the V50 Ballistic Impact Response of Soft Body Armor Composite Structures” G Nilakantan and S Nutt, Compos Structures (2014) DOI or USC Composites
“Poly(phenylene oxide) modified cyanate ester resin for self-healing” L. Yuan, S. Huang, Y Hu, A Gu, G Liang, G Chen, Y Gao, and, S Nutt, Polymers for Advanced Technologies (2014) DOI or USC Composites
“Effects of Clamping Design on the Ballistic Impact Response of Soft Body Armor” G Nilakantan and S Nutt, Compos Structures (2014) DOI or USC Composites
“Blends of Polystyrene and Poly (n-Butyl Methacrylate) Mediated by Perfluorocarbon End Groups” J Shen, V Piunova, S Nutt and T Hogen-Esch, Polymer (2013) DOI or USC Composites
“Synthesis of poly(urea-formaldehyde) encapsulated dibutyltin dilaurate through the self-catalysis of core materials” L Yuan, F Chen, A Gu, G Liang, C Lin, S Huang, and S Nutt, Polymer Bulletin (2013) DOI or USC Composites
“A cyanate ester/microcapsule system with low cure temperature and self-healing” L Yuan, S Huang, A Gu, G Liang, F Chen, Y Hui, and S Nutt, Compos Sci & Tech (2013) DOI or USC Composites
“Hypervelocity Impact of Bulk Metallic Glasses and Composites" L. Hamill, S Roberts, M Davidson, W Johnson, S Nutt, and D Hofmann, Adv Engrg Matls (2013) DOI or USC Composites
“An Amelogenin-Chitosan promotes assembly of an enamel-like layer with a dense interface” Q Ruan, Y Zhang, X Yang, S Nutt, and J Moradian-Oldak, Acta Biomaterialia (2013) DOI or USC Composites
“Investigating Amorphous Metal Composite Architectures as Spacecraft Shielding” M Davidson, S Roberts, G Castro, RP Dillon, A Kunz, H Kozachkov, MD Demetriou, WL Johnson, S Nutt, and D Hofmann, Adv Engrg Matls (2012) DOI or USC Composites
“Novel polytphenylene oxide microcapsules filled with epoxy resins” L Yuan, A Gu, S Nutt, J Wu, C Lin, F Chen, and G Liang, Polymers Adv Tech (2012) DOI or USC Composites
“Moisture Absorption in Unidirectional Hybrid Composites” E Barjasteh and S Nutt, Compos A (2012) DOI or USC Composites
“Multifunctional Superhydrophobic Composite Films from a Synergistic Self-Organization Process” H Lu, M Fang, Z Tang, and S Nutt, J Mater Chem (2012) DOI or USC Composites